Stainless steel conical pipe cap thick wall large diameter oval/conical welded head pipe fittings
PRODUCT DETELS
Stainless steel conical pipe caps and welded head pipe fittings are commonly used in various industries for joining and sealing pipes. Let's discuss these terms in more detail:
-
Stainless Steel Conical Pipe Cap:
- A stainless steel conical pipe cap is a component used to seal the end of a pipe with a conical shape.
- It is typically made from stainless steel, which offers excellent corrosion resistance, strength, and durability.
- The conical shape of the cap ensures a secure fit onto the pipe, providing a tight seal.
-
Thick-Wall Large Diameter:
- Thick-wall large diameter refers to pipes or fittings with a significant wall thickness and a larger-than-average outer diameter.
- Thick-wall construction provides enhanced strength and durability, making it suitable for high-pressure or demanding applications.
- Large diameter fittings accommodate pipes with a larger cross-sectional area for improved flow and increased capacity.
-
Oval/Conical Welded Head Pipe Fittings:
- Oval or conical welded head pipe fittings refer to fittings with an oval or conical shape that are joined to pipes using a welding process.
- These fittings are typically used to facilitate changes in pipe direction, size, or configuration.
- The welding process ensures a strong and leak-resistant connection.
When selecting stainless steel conical pipe caps or welded head pipe fittings, consider factors such as material compatibility, pressure ratings, temperature limitations, and compliance with relevant industry standards (e.g., ASTM, ASME, or specific codes for your application).
Consult with engineers, piping experts, or reputable manufacturers to ensure the correct selection of stainless steel materials, appropriate fitting dimensions, and proper welding techniques for your specific needs. They can assist you in obtaining the right fittings and provide guidance on installation procedures and compliance with applicable regulations.
Order information:
- Pls provide us with below information
- Material grade. Including special requirement if have
- Head Diameter
- Nom THK or min thick
- Straight Flange if have
- others special forming process
The scope of products
Applicable to various building decoration industries
Widely used in electric power, metallurgy, food, pharmaceutical, petrochemical, water treatment equipment and light industry equipment. The company can also undertake the processing of incoming drawings and samples according to customer requirements, and customize products of different specifications.
production workshop
equipment Exhibition
A corner of the warehouse
One-stop ordering of head products
Non-standard customization In stock for two days Customized for seven days
SPECIFICATIONS
| Brand Name: | HaiQun |
| Diameter: | 89mm--10000mm |
| Thickness: | 2mm--300mm |
| Reduction Ratio: | about 10% |
| Material: | Carbon Steel, Stainless Steel, Duplex, Super Duplex, Aluminum, Nickel and Nickel Alloys, Copper and Copper Alloys, Titanium and Its Alloys, Zirconium and all cladded material combinations. |
| Forming method: | Hot forming,cold forming |
| Surface Treatment: | Sand Blasting,Pickling,oil,discaling |
| Inspection: | UT,RT,MT,PT,TOFD. |
| Applicable Standard: | ASME ,PED and GB |
| Certificate: | ISO9001,ISO45001,OHSAS18001 |
| Applications: | Such as oil, chemical industry, water conservancy, electric power,
boiler, machinery, metallurgy, sanitary construction etc. |
| Package: | Wooden cases ,wooden pallet,Steel pallet or as per customers requirement |
| Customized Product: | Available |
| Material | Carbon Steel; Stainless Steel; Special Steel |
| Size | 50-10000mm |
| Thickness | 2mm--300mm |
| Surface Treatment | 1. Intermediate & Final stage Heat Treatments;
2. Sand / Shot Blasting after Heat Treatment;
3. Weld Edge Preparation (Manual & Machined) |
| Reduction ratio | About 10% |
| Certificate | ISO9001 |
| Technology | 1. Cold & Hot forming;
2. Hot Pressed Hemispheres and Cold Formed Segmental Hemispheres; |
| Applicable standard | ANSI, ASME, MSS, API, DIN, JIS, BS. AWWA |
| Test | 1. Liquid Penetrant Examination;
2. Ultrasonic Testing;
3. 100% Radiography Testing of weld seams;
4. Magnet Particle Examination;
5. Inspection under various Third party Inspection Agencies
6. NDT( after forming): DPT, RT, MPI, UT;
7. NDT: 100% DPT, UT & RT OF weld joint |
| Connection | Welding |
| Application | Pressure vessel |
PRODUCTS
FAQ
Q: Why choose us?
A: Our company has been in the header manufacturing business for more than thirty years. We have rich international experience and professionalism, and we can provide customers with a variety of high-quality header products.
Q: Can we provide OEM/ODM service?
A: Yes.Please feel free to contact us for further details.
Q: What are your terms of payment?
A: One is to telegraphic transfer 30% of the deposit before production the remaining 70% to the copy of the bill of lading;The other is an irrevocable 100% sight L/C
Q: Can we visit your factory?
A: A warm welcome.Once we have your itinerary we will arrange for a professional sales team to follow up your case.
Q: Can you provide samples?
A: Yes,the sample of general size is free of charge,but the buyer needs to pay the shipping fee.
Product Tags:
|
|
Welded Conical Dished Head Manufacturers Conical Pipe Cap Thick Wall Images
|
